PG Cable Ladder M Series 45o Horizontal Bends (PG to ISO 10346)
| Order Code | Stock Code | H mm | W mm | T mm | Weight (kg/mt) |
| 410-M-04 PG | 01008410HBM04PG | 40 | 100 | 1,2 | 0.200 |
| 420-M-04 PG | 01008420HBM04PG | 40 | 200 | 1,2 | 0.250 |
| 430-M-04 PG | 01008430HBM04PG | 40 | 300 | 1,2 | 0.300 |
| 440-M-04 PG | 01008440HBM04PG | 40 | 400 | 1,2 | 0.350 |
| 450-M-04 PG | 01008450HBM04PG | 40 | 500 | 1,2 | 1.200 |
| 460-M-04 PG | 01008460HBM04PG | 40 | 600 | 1,2 | 1.250 |
| 410-M-05 PG | 01008410HBM05PG | 50 | 100 | 1,2 | 2.300 |
| 420-M-05 PG | 01008420HBM05PG | 50 | 200 | 1,2 | 2.350 |
| 430-M-05 PG | 01008430HBM05PG | 50 | 300 | 1,2 | 3.200 |
| 440-M-05 PG | 01008440HBM05PG | 50 | 400 | 1,2 | 3.250 |
| 450-M-05 PG | 01008450HBM05PG | 50 | 500 | 1,2 | 3.300 |
| 460-M-05 PG | 01008460HBM05PG | 50 | 600 | 1,2 | 3.350 |
| 410-M-06 PG | 01008410HBM06PG | 60 | 100 | 1,2 | 5.200 |
| 420-M-06 PG | 01008420HBM06PG | 60 | 200 | 1,2 | 5.250 |
| 430-M-06 PG | 01008430HBM06PG | 60 | 300 | 1,2 | 5.300 |
| 440-M-06 PG | 01008440HBM06PG | 60 | 400 | 1,2 | 5.350 |
| 450-M-06 PG | 01008450HBM06PG | 60 | 500 | 1,2 | 6.200 |
| 460-M-06 PG | 01008460HBM06PG | 60 | 600 | 1,2 | 6.250 |
| 410-M-07 PG | 01008410HBM07PG | 70 | 100 | 1,2 | 7.300 |
| 420-M-07 PG | 01008420HBM07PG | 70 | 200 | 1,2 | 7.350 |
| 430-M-07 PG | 01008430HBM07PG | 70 | 300 | 1,2 | 8.200 |
| 440-M-07 PG | 01008440HBM07PG | 70 | 400 | 1,2 | 8.250 |
| 450-M-07 PG | 01008450HBM07PG | 70 | 500 | 1,2 | 8.300 |
| 460-M-07 PG | 01008460HBM07PG | 70 | 600 | 1,2 | 8.350 |
| 410-M-10 PG | 01008410HBM10PG | 100 | 100 | 1,2 | 10.200 |
| 420-M-10 PG | 01008420HBM10PG | 100 | 200 | 1,2 | 10.250 |
| 430-M-10 PG | 01008430HBM10PG | 100 | 300 | 1,2 | 10.300 |
| 440-M-10 PG | 01008440HBM10PG | 100 | 400 | 1,2 | 10.350 |
| 450-M-10 PG | 01008450HBM10PG | 100 | 500 | 1,2 | 11.200 |
| 460-M-10 PG | 01008460HBM10PG | 100 | 600 | 1,2 | 11.250 |
INFORMATION:
L: Length
T: Thickness
W: Width
PG: Pregalvanized
HDG: Hot Dip Galvanized
Material Thickness and Weight Tolerans: ± 10
DESCRIPTIONS:
1- “A ve B” Sizes Are Equal In Standard Production If Required
“B Sizes” Can Be Changed By Using Reducing Parts.
2- For other rediouses, please refer to page 240.
3- Different sheet thicknesses can be produced.
4- Please indicate order code and the Type of coating in your orders.