Product code
Product Name (alphabetical)
A 20-FMD-100-15 PG
A 20-FMD-100-15 PG
FMD Type Cable LadderW: 200 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 20-FMD-100-15 HDG
A 20-FMD-100-15 HDG
FMD Type Cable LadderW: 200 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 20-FMD-100-20 PG
A 20-FMD-100-20 PG
FMD Type Cable LadderW: 200 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 20-FMD-100-20 HDG
A 20-FMD-100-20 HDG
FMD Type Cable LadderW: 200 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 30-FMD-100-15 PG
A 30-FMD-100-15 PG
FMD Type Cable LadderW: 300 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 30-FMD-100-15 HDG
A 30-FMD-100-15 HDG
FMD Type Cable LadderW: 300 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 30-FMD-100-20 PG
A 30-FMD-100-20 PG
FMD Type Cable LadderW: 300 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 30-FMD-100-20 HDG
A 30-FMD-100-20 HDG
FMD Type Cable LadderW: 300 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 40-FMD-100-15 PG
A 40-FMD-100-15 PG
FMD Type Cable LadderW: 400 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 40-FMD-100-15 HDG
A 40-FMD-100-15 HDG
FMD Type Cable LadderW: 400 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 40-FMD-100-20 PG
A 40-FMD-100-20 PG
FMD Type Cable LadderW: 400 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 40-FMD-100-20 HDG
A 40-FMD-100-20 HDG
FMD Type Cable LadderW: 400 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 50-FMD-100-15 PG
A 50-FMD-100-15 PG
FMD Type Cable LadderW: 500 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 50-FMD-100-15 HDG
A 50-FMD-100-15 HDG
FMD Type Cable LadderW: 500 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 50-FMD-100-20 PG
A 50-FMD-100-20 PG
FMD Type Cable LadderW: 500 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 50-FMD-100-20 HDG
A 50-FMD-100-20 HDG
FMD Type Cable LadderW: 500 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 60-FMD-100-15 PG
A 60-FMD-100-15 PG
FMD Type Cable LadderW: 600 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 60-FMD-100-15 HDG
A 60-FMD-100-15 HDG
FMD Type Cable LadderW: 600 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 60-FMD-100-20 PG
A 60-FMD-100-20 PG
FMD Type Cable LadderW: 600 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 60-FMD-100-20 HDG
A 60-FMD-100-20 HDG
FMD Type Cable LadderW: 600 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 70-FMD-100-15 PG
A 70-FMD-100-15 PG
FMD Type Cable LadderW: 700 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 70-FMD-100-15 HDG
A 70-FMD-100-15 HDG
FMD Type Cable LadderW: 700 mm · H: 100 mm · T: 1,5 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter
A 70-FMD-100-20 PG
A 70-FMD-100-20 PG
FMD Type Cable LadderW: 700 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Pre Galvanized
Unit: Meter
A 70-FMD-100-20 HDG
A 70-FMD-100-20 HDG
FMD Type Cable LadderW: 700 mm · H: 100 mm · T: 2 mm · L: 3000 mm · Hot Dip Galvanized
Unit: Meter

 

Ardıç FMD Heavy Duty Cable Ladders are reinforced metal cable support systems designed for demanding industrial installations and high cable load requirements. Featuring specially engineered high-strength side rails, profile heights up to 200 mm (H200), non-welded snap-fit rungs and splice coupler connections, the FMD series provides structural strength for large-scale electrical infrastructure projects.

Specially Reinforced Side Rail Design

The main advantage of the FMD series is its specially formed side rail geometry, designed to provide increased structural rigidity and resistance to bending under load.

Compared with the FM cable ladder series, FMD features a stronger side rail construction intended for more demanding mechanical and load-bearing requirements.

This reinforced design makes FMD suitable for consideration in industrial projects involving higher cable loads, wide cable routes and demanding support arrangements.

For less demanding installations where integrated quick-connect joints are preferred, explore FM Type Cable Ladders. Actual load capacity should always be compared using the relevant product load graphs and support spacing.

Heavy Duty Connections with Separate Splice Couplers

Unlike CM and FM cable ladders, the FMD series requires separate splice couplers to connect straight ladder sections.

Each straight joint requires two splice couplers, allowing adjacent ladder sections to be assembled using the appropriate connection hardware.

The correct joint arrangement, fastening components and installation details must be confirmed according to the selected ladder dimensions and project specifications.

For bends, branches and other route requirements, explore compatible Cable Ladder Accessories.

Non-Welded Snap-Fit Rung System

FMD cable ladder rungs are mechanically secured to the side rails through a specially designed snap-fit system. No welding is required at the rung connections.

Eliminating welding at these points helps prevent localized surface and protective coating damage associated with welding operations. This reduces potential corrosion-sensitive areas at the rung joints.

Each standard 3000 mm FMD cable ladder section contains 10 snap-fit rungs. Overall corrosion resistance depends on the selected surface finish, environmental exposure and installation conditions.

FMD Cable Ladder Dimensions and Surface Finishes

  • Available widths: 200–1000 mm
  • Side rail heights: 100, 150 and 200 mm
  • Steel thicknesses: 1.5 and 2.0 mm
  • Standard section length: 3000 mm
  • Rungs: 10 per standard section
  • Straight connections: Two separate splice couplers per joint
  • Surface finishes: Pre-Galvanized (PG) and Hot-Dip Galvanized (HDG)
  • Additional manufacturing options: Alternative lengths and stainless steel (SS304)

These values describe the overall FMD product range. Available combinations of width, height, steel thickness and surface finish depend on the individual product code.

H200 FMD Cable Ladders and Load-Bearing Performance

The FMD series offers reinforced side rail heights up to 200 mm, providing additional configuration options for demanding industrial cable routes.

For an example of the H200 range, explore the FMD Heavy Duty Cable Ladder with 200 mm width, 200 mm side rail height and 2 mm steel thickness.

Actual load-bearing capacity depends on side rail geometry, ladder dimensions, material thickness, support spacing and installation conditions.

Engineers should use the applicable product drawings and load graphs to determine the correct configuration and support arrangement for their projects.

Industrial Applications and Cable Ladder Selection

Ardıç FMD Heavy Duty Cable Ladders can be specified for power generation facilities, manufacturing plants, heavy industrial installations and electrical infrastructure projects with demanding cable load requirements.

When selecting an FMD cable ladder, consider total cable weight, routing width, support spacing, environmental conditions and compatibility of splice couplers and mounting components.

Explore additional product families in the Ardıç Cable Ladder Systems range.

Review product specifications and Data Sheets, then contact Ardıç Elektrik with your drawings or bill of materials to request a project quotation.

Frequently Asked Questions

What is the difference between FMD and FM cable ladders?

FMD features specially reinforced side rails for higher structural strength requirements. Unlike FM's integrated quick-connect system, FMD requires two separate splice couplers at each straight joint.

Do FMD cable ladders require splice couplers?

Yes. Each straight joint requires two splice couplers and the appropriate fastening components.

Are FMD cable ladder rungs welded?

No. FMD rungs are mechanically secured to the side rails using a snap-fit system without welded rung joints.

What is the maximum side rail height of FMD cable ladders?

The FMD series includes H100, H150 and H200 configurations, with a maximum side rail height of 200 mm.

How is FMD cable ladder load capacity determined?

Load capacity depends on ladder dimensions, steel thickness, support spacing and installation conditions. The applicable technical load graphs should be used for final engineering selection.

 

Cable Ladder Subcategories
Other categories
Brands
ARDIÇ
ARTAŞ
Juniper
YTS
EMT